1.What is aluminum plate?
Aluminum plate generally refers to a rectangular material with a rectangular cross-section and uniform thickness made of pure aluminum or aluminum alloy materials through pressure processing. Internationally, it is customary to call aluminum materials with a thickness of more than 0.2mm, less than 500mm, a width of more than 200mm, and a length of less than 16m as aluminum plates or aluminum sheets.

The difference between a metal sheet and metal plate can be defined by thickness.
If the thickness of the metal is ¼” (6mm) or more, then it is considered a plate. Plate thickness is typically measured in inches. If the thickness is less than ¼” (6mm), it is considered sheet.Plate and sheets has to do with the distinct applications for which they are used.

What is aluminum foil?
Aluminum foil is a very thin aluminum product, usually less than 0.2 mm thick. It is made of high-purity aluminum metal and contains about 92-99% aluminum and can be easily bent or torn. The width and strength of aluminum foil will vary greatly for different applications. It is a durable, non-toxic, oil-proof and chemical-resistant material.

Aluminum coil is a metal product that is cut by flying shear after rolling and bending processing in the casting and rolling mill.

Aluminum 1100 is one of the most widely used alloys, with excellent forming properties, especially in the fully soft, annealed temper. It may be suitable for applications that require bending, spinning, drawing, stamping and roll forming. It has good thermal conductivity and is often used in heat exchangers and as heat sinks in electrical applications.